Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you peform the BCM Diagnostic System Check? | -- | Go to Step 2 | Go to Diagnostic System Check - Body Control System in Body Control System |
2 |
Is the Security Indicator Lamp ON? | -- | Go to Step 3 | Go to Step 4 |
3 | Test the security indicator lamp control circuit for a short to ground. Refer to Testing for Short to Ground in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 5 | -- |
4 | Inspect for poor connections at BCM connector C2. Refer to Testing for Intermittent Conditions and Poor Connections in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 5 | Go to Step 6 |
5 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | -- |
6 | Replace the BCM. Did you complete the replacement? | -- | Go to Step 5 | -- |
