Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the Wiper/Washer System Circuit Description and perform the necessary inspections? | -- | Go to Step 2 | |
2 |
Is the resistance within the specified values? | 0.68K-5K ohms | Go to Step 8 | Go to Step 3 |
3 |
Is the resistance within the specified values. | 0-2 ohms | Go to Step 4 | Go to Step 7 |
4 |
Is the resistance within the specified values? | 0.68K-5K ohms | Go to Step 5 | Go to Step 7 |
5 | Test and repair the delay switch signal circuit for an open or high resistance. Refer to Testing for Continuity and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 10 | Go to Step 6 |
6 | Repair the open or high resistance in the interval switch signal circuit. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 10 | -- |
7 | Replace the windshield wiper/washer switch. Refer to Windshield Wiper and Washer Switch Replacement - On Vehicle in Steering Wheel and Column-Tilt. Is the repair complete? | -- | Go to Step 10 | -- |
8 | Test and repair the accessory voltage circuit to the windshield wiper motor position switch for an open or high resistance. Refer to Testing for Continuity and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 10 | Go to Step 9 |
9 | Replace the windshield wiper motor relay. Is the repair complete? | -- | Go to Step 10 | -- |
10 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
