Circuit Description
When you first turn ON the ignition, the inflatable restraint sensing and diagnostic and seat belt pretensioner module (SDM) performs tests to diagnose critical malfunctions within itself. Then, the SDM proceeds with the RESISTANCE MEASUREMENT test to measure the deployment loop resistances to ensure that they are within their respective normal resistance ranges.
Conditions for Running the DTC
When the ignition voltage is within the normal operating voltage range, the SDM performs the internal malfunction checks to ensure that no malfunctions exist within the SDM.
Conditions for Setting the DTC
The DTC will set when an internal malfunction has been detected by the SDM.
Action Taken When the DTC Sets
The SDM turns ON the AIR BAG warning lamp.
Conditions for Clearing the DTC
| • | A Current DTC is latched. A Current DTC will clear when the SDM is replaced. |
| • | A History DTC can be cleared by using a scan tool. |
Diagnostic Aids
This DTC is an indication of an internal malfunction within the SDM.
Test Description
Then numbers below refer to step numbers on the diagnostic table.
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform A Diagnostic System Check - SIR? | -- | Go to Step 2 | |
Does the scan tool indicate that this DTC is current? | -- | Go to Step 4 | Go to Step 3 | |
Does the scan tool indicate that this DTC is history? | -- | Go to Step 5 | -- | |
4 |
Did you complete the replacement? | -- | Go to Step 5 | -- |
5 |
Did you complete the action? | -- | -- |
