For 1990-2009 cars only
Tools Required
| • | J 5403 Snap Ring Pliers |
| • | J 9553-01 O-Ring Remover |
- Remove the switch retaining ring using the J 5403 .
- Remove the switch (3 or 4) from the compressor.
- Remove the old O-ring seal from the switch cavity using the J 9553-01 .
Notice: If the existing switch will be reinstalled in the compressor, a new O-ring seal must be used and preferably a new retainer should also be used. A new switch kit has the O-ring and retainer ring included.
