Name | Location | Locator View | Connector End View |
|---|---|---|---|
Adaptor Case | LH front of the transmission, behind the bell housing | ||
Automatic Transmission Control Indicator | Center console | Instrument Panel, Gages, and Console Component Views in Instrument Panel, Gauges and Console | |
Automatic Transmission Range Switch | LH side of the transmission housing | Lighting Systems Connector End Views in Lighting Systems | |
Automatic Transmission Winter Mode Switch | Center Console | -- | |
Data Link Connector (DLC) | Attached to the I/P carrier, to the left of the steering column | -- | Data Link Communications Connector End Views in Data Link Communications |
Engine Control Module (ECM) | LH front of the engine compartment, in the ECM housing | Engine Controls Component Views in Engine Controls | Engine Controls Connector End Views in Engine Controls |
Fuse Block | Mounted to the I/P, lower LH side of the steering column | -- | -- |
Ignition Switch | Mounted on the upper RH side of the steering column | -- | Engine Electrical Connector End Views in Engine Electrical |
Inside Rear View Mirror | Attached to the upper center of the windshield | Stationary Windows Connector End Views in Stationary Windows | |
Instrument Cluster | LH side of the I/P, above the steering column | -- | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges and Console |
Main Case | LH side of the transmission | ||
Vehicle Speed Sensor (VSS) Assembly | LH rear of the transmission housing | ||
Power Distribution Fuse Block | LH front of the engine compartment, attached to the ECM housing, above the battery | -- | -- |
Sport Mode Switch | Part of automatic transmission shift lever | -- | -- |
Transmission Control Module (TCM) | Behind the RH side of the I/P | -- | |
C105 (white connector) | I/P wiring harness to ECM wiring harness, at the LH front of the engine compartment, just behind the battery | Wiper/Washer Component Views in Wiper/Washer System | Inline Harness Connector End Views in Wiring Systems |
C106 (blue connector) | I/P wiring harness to ECM wiring harness, at the LH front of the engine compartment, just behind the battery | Wiper/Washer Component Views in Wiper/Washer System | Inline Harness Connector End Views in Wiring Systems |
C200B | I/P wiring harness to body wiring harness, at lower LH A-pillar | Power and Grounding Component Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C205 | I/P wiring harness to automatic transmission control switches, attached to the automatic transmission control base, to the right of the shift lever | -- | Inline Harness Connector End Views in Wiring Systems |
G103 | Body and I/P wiring harnesses, located at the LH front of the engine compartment, underneath the battery tray | Wiper/Washer Component Views in Wiper/Washer System | -- |
P104 | LH engine compartment, at the front of the ECM housing | -- | -- |
P108 | LH engine compartment, at the rear of the ECM housing | Power and Grounding Component Views in Wiring Systems | -- |
P110 | Rear LH corner of the engine compartment | -- | -- |
S127 | ECM wiring harness, in the ECM housing, approximately 3 cm (1 in) from P108 | -- | -- |
S204 | I/P wiring harness, approximately 16 cm (6 in) from P110, towards connector C200 branch break off | -- | -- |
S205 | I/P wiring harness, approximately 61 cm (24 in) from gauge cluster connector branch break off, between blower control and transmission control module branch break offs | -- | -- |
S211 | I/P wiring harness, approximately 18 cm (7 in) from cruise release switch and stoplamp switch branch break off, to the right of DLC connector branch break off | -- | -- |
S212 | I/P wiring harness, approximately 46 cm (18 in) from cruise release switch and stoplamp switch branch break off, mounted in harness channel behind LH side of heater and A/C control unit | -- | -- |
S225 | I/P wiring harness, mounted in harness channel behind LH side of heater and A/C control unit, approximately 4 cm (2 in) from gauge cluster connector branch break off | -- | -- |
S231 | I/P wiring harness, approximately 12 cm (5 in) from cruise release switch and stoplamp switch branch break off, to the right of DLC connector branch break off | -- | -- |
S250 | I/P wiring harness, mounted in harness channel behind RH side of heater and A/C control unit, approximately 22 cm (9 in) from gauge cluster connector branch break off | -- | -- |
