GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2000 🢒 Catera 🢒 Engine 🢒 Engine Controls - 3.0L (L81) 🢒 Secondary Air Injection Check Valve and Check Valve Pipe Replacement

Removal Procedure

    Object Number: 61650 Size: SH
  1. Remove the AIR hose clamps.
  2. Remove the AIR hoses.
  3. Remove the AIR check valve (3) from the center AIR pipe (4).
  4. Remove the center AIR pipe (4).
  5. Remove the upper exhaust manifold heat shield.
  6. Remove the bolts in the AIR pipe.
  7. Remove the AIR pipe from the exhaust manifold.
    8. • Air pipe bank 1 (1)
    • Air pipe bank 2 (2)

Installation Procedure
  1. Install the AIR pipe gaskets on the new AIR pipes.

    2. Object Number: 61650 Size: SH

    Important: Before installing the AIR pipes, clean the surface of the exhaust manifold to ensure tight seal. Use an anti-seize compound GM P/N 5613695 or equivalent on the AIR pipe nipple to manifold, the bolts, and the AIR check valve.

  2. Install the AIR pipes to the exhaust manifolds on the following:
    3. • AIR pipe bank 1 (1)
    • AIR pipe bank 2 (2)
  3. Install the bolts into the AIR pipes.

    4. Tighten
    Tighten the bolts to 20 N·m (15 lb ft).

  4. Install the upper exhaust manifold heat shields.
  5. Install the center AIR pipe (4).
  6. Install the AIR check valve (3).

    7. Tighten
    Tighten the AIR check valve to 30 N·m (22 lb ft).

  7. Connect the AIR hoses.
  8. Install the AIR hose clamps.
  9. Check for air leaks.