Conditions for Setting the DTC
This DTC sets when the vehicle's battery voltage is continuously above
16.5 V or below 9.0 V.
Action Taken When the DTC Sets
During this period of voltage out-of-range, the detection of leveling
output and position out-of-range malfunction, the air replacement cycle (ARC),
and the intake and exhaust activities are disabled. This is necessary in order
to prevent erroneous detection of malfunction conditions due to engine crank
or unusual system voltage conditions.
Conditions for Clearing the DTC
| • | The DTC will clear when the battery voltage returns to the nominal
range. |
| • | Use a scan tool in order to clear this DTC. |
Diagnostic Aids
| • | Inspect the battery system for proper functionality. |
| • | This DTC does not require the replacing of the automatic level
control (ALC) sensor. |
| • | This DTC will not cause the LEVELING indicator lamp to flash. |
| • | Ensure that the automatic leveling control sensor is receiving
the correct voltage. |
| • | Ensure that the automatic leveling control sensor has a good ground. |
