Step
| Action
| Value(s)
| Yes
| No
|
DEFINITION:
RH front side door lock actuator is inoperative.
|
1
| Was the Power
Door Locks System Check performed?
| --
|
Go to Step
2
| Go to
Power Door Locks System Check
|
2
|
- Disconnect the door lock relay K135 connector.
- Disconnect the RH front side door lock actuator connector.
- Use the DMM to measure the resistance between terminal 10 of the
door lock relay K135 connector and terminal 2 of the RH front side door lock
actuator connector.
Is the measured resistance less than the specified value?
| 5 ohms
|
Go to Step 4
|
Go to Step 3
|
3
|
- Locate an open or a high resistance in circuits FA802 and/or FA809.
- Repair the open or the high resistance in circuits FA802 and/or
FA809.
Is the repair complete?
| --
|
Go to Step
7
| --
|
4
| Use the DMM to measure the resistance between terminal 12 of the door
lock relay K135 connector and terminal 6 of the RH front side door lock actuator
connector.
Is the measured resistance less than the specified value?
| 5 ohms
|
Go to Step 6
|
Go to Step 5
|
5
|
- Locate an open or a high resistance in circuits FB9 and/or FB802.
- Repair the open or the high resistance in circuits FB9 and/or
FB802.
Is the repair complete?
| --
|
Go to Step
7
| --
|
6
| Replace the RH front side door lock actuator. Refer to
Front Side Door Lock Actuator Replacement
in Doors.
Is the replacement complete?
| --
|
Go to Step
7
| --
|
7
|
- Connect all connectors and components that were disconnected.
- Verify that the RH front side door lock actuator operates properly.
Does the RH front side door lock actuator operate properly?
| --
| System OK
|
Go to Step 1
|
