Removal Procedure
- Remove the front grille.
Refer to
Grille Replacement
.
- Remove the grille emblem retainer.
- Hold a heat gun at least 152 mm (6 in) from the
emblem. Move the heat gun in a circular motion.
- Use a plastic flat bladed tool in order to peel the emblem from
the grille.
- Clean the area using a suitable solvent of isopropyl alcohol 50/50
mixture by volume with water, or use a high flash naphtha.
Installation Procedure
- The front grille and the front grille emblem temperature must
be 26°C (80°F) minimum, or 6°C (10°F) above the ambient air
temperature, whichever is higher. DO NOT exceed 40°C (105°F) during
the installation of the front grille emblem.
- Remove the backing.
- Position the front grille
emblem directly over the molded wreath and crest on the grille.
- Secure the front grille emblem by pressing the emblem to the grille.
- Install the grille emblem retainer.
- Install the front grille. Refer to
Grille Replacement
.