GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1999 🢒 Catera 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Ashtray Lamp Replacement

Removal Procedure
  1. Open the ashtray.

    2. Object Number: 159441 Size: SH
  2. Push the gray tab to the right to release the tray.
  3. Remove the tray.

    4. Object Number: 245642 Size: SH
  4. Remove the ashtray assembly screw located behind the top of the assembly.
  5. Remove the ashtray assembly.

    6. Object Number: 159480 Size: SH
  6. Remove the bulb from the bulb socket.

Installation Procedure

    Object Number: 159480 Size: SH
  1. Install the bulb to the bulb socket.

    2. Object Number: 245642 Size: SH
  2. Install the ashtray assembly to the dash.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the ashtray assembly screw.

    4. Tighten
    Tighten the ashtray assembly screw until fully seated. Ensure not to strip the ashtray assembly screw.


    Object Number: 159441 Size: SH
  4. Snap in the ashtray.
  5. Close the ashtray.