Removal Procedure
- Open the hood.
- Unscrew the self-locking
tab on the radiator cover.
- Unclip the radiator cover from the body to remove the radiator
cover.
- Remove the battery if replacing left front headlamp bulb. Refer
to
Battery Replacement
in Engine Electrical.
- Remove the rubber protective cover from the back of the headlamp
to reveal the bulb.
- Separate the bulb fastening
tangs (1).
- Carefully remove the bulb.
- Remove the electrical connection from the bulb.
Installation Procedure
- Install the electrical connection to the bulb.
- Snap the fastening tang
(1) in place to install the bulb.
- Install the rubber protective cover to the back of the headlamp.
- Install the battery if left front headlamp bulb was replaced.
Refer to
Battery Replacement
in Engine Electrical.
- Seat the tab to the body
of the radiator cover.
- Secure the radiator cover by turning the self-locking tab.
- Close the hood.
- Reprogram the applicable accessories if the left front headlamp
bulb was replaced. Refer to
Reprogramming Accessories After Battery Disconnect
in Engine Electrical.