GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1998 🢒 Catera 🢒 Body and Accessories 🢒 Exterior Trim 🢒 Molding Replacement - Rocker Panel Corner

Removal Procedure
  1. Open the doors.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Remove the rear tire and wheel assembly. Refer to Wheel Removal in Tires and Wheels.

    4. Object Number: 162835 Size: SH
  4. Drill out the rocker corner rivets to remove. The rocker molding does not need to be removed to replace the rocker corner molding.
  5. Remove the rear corner molding.

Installation Procedure

    Object Number: 162835 Size: SH
  1. Push the rear corner molding into the rocker molding to lock in place.
  2. Install the rocker corner molding rivets.
  3. Install the rear tire and wheel assembly. Refer to Wheel Installation in Tires and Wheels.
  4. Lower the vehicle.
  5. Close the doors.