Some vehicles may exhibit a condition where the windshield wiper blades chatter or wipe unevenly. Several different conditions can cause wiper blade chatter. To completely repair wiper blade chatter, all or following should be checked and repaired as necessary:

Clean the windshield glass with windshield cleaner. The cleaner used should be one that will not harm the paint finish or scratch the glass. The windshield glass is clean when water no longer beads, but sheets across the entire glass surface.

1. Lift the wiper blade assemblies off of the windshield glass.
2. Clean the wiper blade element with a clean cloth saturated with full strength washer solution.
3. Rinse the wiper blade assemblies with water.
4. Place the wiper blade assemblies back onto the windshield glass.

1. Remove the wiper blade assemblies form the wiper arms. Refer to Windshield Wiper Blade Replacement
2. Look down the length of the blade element. The rubber element (2) that makes contact with the glass must be on the center line of the blade assembly ± 15 degrees (1).
3. Replace the element if necessary.