Removal Procedure
Caution: To help avoid personal injury when a vehicle is on a hoist, provide
additional support for the vehicle at the opposite end from which components
are being removed. This will reduce the possibility of the vehicle falling
off the hoist.
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Remove the temperature sensor located on the lower grille on the
front fascia on the left side of the vehicle.
- Disconnect the electrical connection from the sensor.
- Remove the temperature sensor.
Installation Procedure
- Install the temperature sensor.
- Connect the electrical connection to the sensor.
- Install the temperature sensor to the lower grille on the front
fascia on the left side of the vehicle.
- Lower the vehicle.