Removal Procedure
- Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Disconnect the A/C control
switch connection.
- Remove the A/C control switch.
Installation Procedure
Important: Counterhold the compressor/condenser hose using a wrench.
- Install the A/C control switch:
• | Lubricate the new O-rings using mineral oil, 525 viscosity. |
Tighten
Tighten the A/C control switch to 7 N·m (62 lb in).
- Connect the A/C control switch connector.
- Lower the vehicle.