Rocker Panel Molding Replacement Rocker Molding

1. Open the doors.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.



3. Push in on the center of each of the rocker molding lower retainers and then pull out.
4. Slide the rocker molding forward to release from the retainers.
5. Use a small flat-bladed tool to carefully unsnap the rocker moulding.
6. Remove the rocker molding.
7. Remove the rocker molding retainer from the weld stud. If a weld stud becomes damaged during the removal procedure. Refer to Weld Stud Replacement

1. Install the rocker molding.
2. Slide the rocker molding rearward on the retainers to lock in place.



3. Install the rocker molding lower retainers.
4. Lower the vehicle.
5. Close the doors.