GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 243438  Size: SH
  1. Remove the rubber conduit from the center pillar:
  2. • Hold at the center pillar base or at the lower door.
    • Stay close to the ends while using a turning-pulling motion in order to loosen the conduit.
    • Remove the conduit.
  3. Disconnect the conduit connectors.
  4. Remove the conduit from the wiring harness.

Installation Procedure


    Object Number: 243438  Size: SH
  1. Install the conduit on the harnesses.
  2. Connect the connectors.
  3. Install the conduit to the center pillar.