Step
| Action
| Value(s)
| Yes
| No
|
1
| Was the Cruise Control System Check performed?
| --
|
Go to Step 2
| Go to
Cruise Control System Check
|
2
|
- Connect the scan tool to the Data Link Connector (DLC).
- Select TIP SWITCH R.
- Press and hold the RESUME/DECEL button.
Does the scan tool display ACTIVE?
| --
|
Go to Step
3
|
Go to Step 4
|
3
|
- Check for a poor connection at the cruise control module connector
terminal C.
- Replace the cruise control module if the cruise control module
connector terminal C is OK.
Is the repair or replacement complete?
| --
|
Go to Step 7
| --
|
4
|
- Disconnect the connector from the cruise control switch.
- Turn the ignition switch to the ON position.
- Connect a fused jumper wire across terminal B and terminal C of
the connector.
Does the scan tool display ACTIVE?
| --
|
Go to Step
5
|
Go to Step 6
|
5
| Replace the cruise control switch. Refer to Steering Wheel and Column
On Vehicle Service.
Is the replacement complete?
| --
|
Go to Step
7
| --
|
6
|
- Locate an open circuit between S200 and terminal C of the module
connector.
- Repair the open circuit between S200 and terminal C of the module
connector.
Is the repair complete?
| --
|
Go to Step
7
| --
|
7
|
- Connect all connectors and components that were disconnected.
- Verify that the cruise control system operates properly.
Does the cruise control system operate properly?
| --
| System OK
| Go to
Cruise Control System Check
|
