Did you perform the Instrument Cluster System Check?

--

Go to Step 2

Go to Instrument Cluster System Check

1. Disconnect the engine oil level sensor connector.
2. Drive the vehicle for approximately half a mile.

Is the indicator lamp ON?

--

Go to Step 3

Go to Step 4

Replace the engine oil level sensor.

Is the replacement complete?

--

Go to Step 5

--

1. Test for a short to ground in CKTs XU4 and XU600.
2. If OK, replace the gauge cluster.

Is the repair or replacement complete?

--

Go to Step 5

--

1. Connect all connectors and components that you previously removed.
2. Test the low engine oil level indicator.

Does the low engine oil level indicator operate properly?

--

System OK

Go to Step 2