GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1997 🢒 Catera 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Knee Bolster Replacement

Removal Procedure

    Object Number: 351087 Size: SH

    Important: Do NOT separate the retainers from the bolster.

  1. Turn threaded retainers counterclockwise.
  2. Slide the bolster down and remove the bolster from the mounting pins.

Installation Procedure

    Object Number: 351087 Size: SH
  1. Position the bolster onto the mounting pins and slide up into position and hold.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the threaded retainers clockwise.

    3. Tighten
    Tighten the retainers until fully seated.