For 1990-2009 cars only
Removal Procedure
- Remove the rear seat to rear window trim panel. Refer to Rear Window Trim Panel Replacement in Body Rear End.
- Disconnect the two wiring harness connectors from the radio signal processor.
- Remove the radio speaker amplifier bracket bolts from the rear seat to rear window trim panel.
- Lower the amplifier bracket from the rear parcel shelf.
- Disconnect the amplifier wiring harness connector.
- Remove the four amplifier bolts.
- Remove the amplifier from the bracket.
Installation Procedure
- Install the amplifier into the bracket.
- Install the four amplifier bolts until fully seated and not stripped.
- Connect the amplifier wiring harness connector.
- Raise the amplifier bracket into the mounting position.
- Install the bracket bolts at the rear parcel shelf.
- Connect the two processor wiring harness connectors.
- Install the rear seat to rear window trim panel. Refer to Rear Window Trim Panel Replacement in Body Rear End.
