Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
1 | Did you perform the Interior Lights Diagnostic System Check? | -- | Go to Interior Lamps System Check . | |
2 |
Does the voltage measure near the specified value? | B+ | ||
3 |
Did you complete the repair? | -- | -- | |
4 | Use the DMM in order to measure the resistance between terminal 1 of the dome and reading lamps connector and a known good ground. Does the resistance measure near the specified value? | Less than 5 ohms | ||
5 |
Did you complete the repair? | -- | -- | |
6 | Replace the dome lamp. Refer to Dome Lamp Replacement in Lighting Systems. Did you complete the repair? | -- | -- | |
7 |
Does the dome lamp operate properly? | -- | Go to Interior Lamps System Check . |