Step
| Action
| Value(s)
| Yes
| No
|
1
| Did you perform the Headlight Diagnostic System Check?
| --
|
Go to Step 2
| Go to
Headlight System Check
.
|
2
|
- Disconnect the left headlamp relay K73 and the right headlamp
relay K132.
- Turn the ignition switch to the ON position.
- Take the transmission out of the PARK position.
- Use a DMM in order to measure the resistance in terminal 2
of the left headlamp relay K73 and terminal 6 of the right headlamp
relay K132.
Is the measured resistance within the specified value?
| Less than 5ohms
|
Go to Step 4
|
Go to Step 3
|
3
|
- Locate an open or a high resistance in CKT M65
- Repair the open or the high resistance in CKT M65.
Did you complete the repair?
| --
|
Go to Step 5
| --
|
4
|
- Replace the left headlamp relay K73.
- Reconnect the right headlamp relay K132.
Did you complete the repair?
| --
|
Go to Step 5
| --
|
5
|
- Connect all connectors and components previously disconnected.
- Verify that the DRL system operates properly.
Does the DRL system operate properly?
| --
| Go to
Headlight System Check
| Go to
Step 1
|
