Removal Procedure
- Disconnect the AIR Cutoff
Valve Vacuum Control solenoid (3) wiring harness connector.
- Disconnect the vacuum hoses (2, 4) observing the proper positions.
- Remove the solenoid bracket fasteners.
- Remove the assembly from the vehicle.
- Remove the valve (1) from the bracket.
Installation Procedure
- Install the valve (1)
to the bracket.
- Install the assembly to the vehicle
- Install/tighten the bracket fasteners.
- Reconnect the vacuum hoses (2, 4) in the correct positions.
- Reconnect the electrical connector (3).