Removal Procedure
Caution: Gasoline or gasoline vapors are highly flammable. A fire could occur
if an ignition source is present. Never drain or store gasoline or diesel
fuel in an open container, due to the possibility of fire or explosion. Have
a dry chemical (Class B) fire extinguisher nearby.
- Disconnect the negative battery cable.
- Remove the intake plenum. Refer to Intake Plenum
Replacement and Installation.
- Disconnect the vacuum hose at the actuator.
- Remove the two switchover valve to plenum bolts.
- Remove the switchover valve from the intake plenum.
Installation Procedure
- Install the switchover valve to the intake plenum.
- Install/tighten the two switchover valve to plenum bolts.
- Reconnect the vacuum hose at the actuator.
- Install the intake plenum. Refer to Intake
Plenum Replacement and Installation.
- Reconnect the negative battery cable.