GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2007 🢒 CTS 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Rear Body Control Module Replacement

Removal Procedure
  1. Remove the rear shelf. Refer to Rear Shelf Carrier Replacement.

    2. Object Number: 802377 Size: SH
  2. Remove the push pins securing the rear body control module (RBCM) (1) to the electrical carrier assembly.
  3. Disconnect the electrical connectors.
  4. Remove the RBCM.

Installation Procedure

    Object Number: 802377 Size: SH
  1. Install the RBCM (1) to the electrical carrier.
  2. Install the push pin fasteners.
  3. Install the rear shelf. Refer to Rear Shelf Carrier Replacement .
  4. If installing a replacement RBCM, program the module. Refer to Control Module References for programming and setup information.