1

Detent Tab

2

Front Side Door Locking Rod Knob Assembly

Procedure

1. Lower the window.
2. Ensure the locking rod is in the unlocked position.
3. Use a flat-bladed tool to disengage the detent tab and then remove the knob by pulling upward.
4. When re-installing, push the knob down until the detent tab touches the locking rod opening cover.
5. Push the detent tab into lock knob to locking rod.

3

Front Side Door Trim Panel Cover

4

Front Side Door Trim Panel Cover Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
1 N·m (9 lb in)

5

Front Side Door Inside Handle Bezel

Procedure

1. Hold the inside handle to the open position.
2. Insert a flat-bladed tool at the top of the bezel and start to pull the bezel away from the door panel.
3. Locate the 2 bezel latch tabs and release to remove the bezel.

6

Front Side Door Trim Panel Assembly

Procedure

1. Use a J 38778 to aid in the removal of the door trim panel.
2. Disconnect the electrical connectors.

Special Tools

J 38778 Door Trim Pad Clip Remover

7

Front Side Door Upper Extension Trim Panel Clip

8

Front Side Door Trim Panel Retainer (Qty: 9)