Removal Procedure
- Turn OFF the ignition.
- Remove the instrument panel (I/P) compartment. Refer to
Instrument Panel Compartment Replacement
.
- Carefully depress the retainers on the traction control switch (2).
- Remove the traction control switch (2) from the I/P compartment.
- Remove the electrical connector (1) from the traction control switch (2).
Installation Procedure
- Connect the electrical connector (1) to the traction control switch (2).
- Carefully push the traction control switch into the I/P compartment until it is locked into place.
- Install the I/P compartment. Refer to
Instrument Panel Compartment Replacement
.