Schematic Reference: Driver Information System Schematics

Connector End View Reference: Displays and Gages Connector End Views

Did you review the operation and perform the necessary inspections?

Go to Step 2

Go to Diagnostic System Check - Vehicle

Inspect for poor connections at the radio. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs .

Did you find and correct the condition?

Go to Step 4

Go to Step 3

Replace the radio. Refer to Control Module References for replacement, setup, and programming.

Did you complete the replacement?

Go to Step 4

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2