Radiator Inlet Hose Replacement LP1, LY7

Tools Required

1. Partially drain the cooling system. Refer to Cooling System Draining and Filling .
2. Position J 38185 to the clamp in order to remove the inlet hose from the radiator.



3. Position J 38185 to the clamp in order to remove the hose (1) from the engine.
4. Remove the inlet hose.

1. Install the radiator inlet hose into the vehicle with the mark in the top position.
2. Position J 38185 to the clamp in order to connect the hose (1) to the engine.



3. Position the J 37097-A to the clamp in order to connect the hose to the radiator.
4. Fill the cooling system. Refer to Cooling System Draining and Filling .

Radiator Inlet Hose Replacement LS2

Tools Required

J 38185 Hose Clamp Pliers

1. Partially drain the cooling system. Refer to Cooling System Draining and Filling .
2. Position J 38185 to the clamp in order to remove the inlet hose from the radiator.



3. Position J 38185 to the clamp in order to remove the hose (1) from the engine.
4. Remove the inlet hose.

1. Position the radiator inlet hose (1) into the vehicle.
2. Position J 38185 to the clamp in order to connect the hose to the engine.



3. Position the J 38185 to the clamp in order to connect the hose to the radiator.
4. Fill the cooling system. Refer to Cooling System Draining and Filling .