GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Cadillac
🢒
2006
🢒
CTS
🢒
Body
🢒
Lighting Systems
🢒 Headlamp Leveling Rear Suspension Height Sensor Replacement
Removal Procedure
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
Remove the right rear tire and wheel assembly. Refer to
Tire and Wheel Removal and Installation
.
Disconnect electrical connector (2).
Disconnect the ball and socket (3) from vehicle.
Remove the bolt (1) from the sensor.
Remove the sensor from the vehicle.
Installation Procedure
Position the sensor (3) to the vehicle.
Install the bolt (1) to secure the sensor (4) to the vehicle.
Tighten
Tighten the bolt to 9 N·m (80 lb in).
Install ball and socket (3) to sensor (4).
Connect electrical connector (2) to the sensor (4).
Install the right tire and wheel assembly. Refer to
Tire and Wheel Removal and Installation
.
Lower the vehicle.