- Install a NEW oil suction tube seal onto the oil suction tube. DO NOT
reuse the old oil suction tube seal.
- Install the oil suction
pipe.
Notice: Refer to Fastener Notice in the Preface section.
- Install the oil suction pipe bolts.
Tighten
Tighten the oil suction pipe bolts to 10 N·m (89 lb in).
- Install the oil pan scraper.
- Install the oil pan scraper bolts.
Tighten
Tighten the oil pan scraper bolts to 10 N·m (89 lb in).
- Install the oil pan drain
plug and NEW O-ring seal.
Tighten
Tighten the oil pan drain plug to 20 N·m (15 lb ft).
- Install the oil level/condition
sensor.
- Install the oil level/condition sensor bolt.
Tighten
Tighten the oil level/condition bolt to 10 N·m (89 lb in).