GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Cadillac
🢒
2004
🢒
CTS
🢒
Steering
🢒
Steering Wheel and Column
🢒 Shift Control Assembly Replacement
Removal Procedure
Remove the shift control knob. Refer to
Transmission Control Lever Knob Replacement
.
Remove the sound insulator foam block from the console.
Remove the bolts (2) securing the shift control assembly to the shift control adapter plate.
Raise the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
Remove the exhaust system. Refer to
Exhaust System Replacement
in Engine Exhaust.
Remove the propeller shaft (6). Refer to
Propeller Shaft Replacement
in Propeller Shaft.
Support the transmission with a suitable jack.
Remove the transmission support. Refer to
Transmission Support Replacement
in Frame and Underbody.
Lower the transmission assembly to gain access to the top of the transmission.
Using a flat blade tool, release the right side shift control rod pin retainer.
Remove the shift control rod pin.
Using a flat blade tool, release the left side shift control rod pin retainer. The graphic shows the transmission removed for clarity.
Remove the shift control rod pin.
Using a flat blade tool, release the center shift control rod pin retainer. The graphic shows the transmission removed for clarity.
Remove the center shift control rod pin retainer.
Remove the shift control assembly from the transmission. Remove the shift control assembly from the vehicle.
Installation Procedure
Install the shift control assembly to the transmission.
Install the center shift control rod pin retainer.
Install the left side shift control rod pin. Rotate the pin in order to lock the retainer into place on the transmission.
Install the right side shift control rod pin. Rotate the pin in order to lock the retainer into place on the transmission.
Raise the transmission .
Install the transmission support. Refer to
Transmission Support Replacement
in Frame and Underbody.
Remove the jack supporting the transmission.
Install the propeller shaft (6). Refer to
Propeller Shaft Replacement
in Propeller Shaft.
Install the exhaust system. Refer to
Exhaust System Replacement
in Engine Exhaust.
Lower the vehicle.
Install the bolts securing the shift control assembly to the adapter plate.
Tighten
Tighten the shift control bolts to 18 N·m (13 lb ft).
Install the sound insulator foam block into the console.
Install the shift control knob. Refer to
Transmission Control Lever Knob Replacement
.