Radiator Surge Tank Inlet Hose/Pipe Replacement LHD

Tools Required

J 38185 Hose Clamp Pliers

1. Partially drain the cooling system. Refer to Cooling System Draining and Filling .



2. Position J 38185 to the clamp in order to remove the surge tank inlet hose (2) from the surge tank (1).



3. Position J 38185 to the clamp in order to remove the surge tank inlet hose from the radiator.



4. Disconnect the air intake duct hoses from the throttle body assembly.



5. Position J 38185 to the clamp in order to remove the surge tank inlet hose from the throttle body assembly.
6. Remove the surge tank inlet hose from the vehicle.

1. Position J 38185 to the clamp in order to connect the surge tank inlet hose to the throttle body assembly.



2. Connect the air intake duct hoses to the throttle body assembly.



3. Position J 38185 to the clamp in order to connect the surge tank inlet hose to the radiator.



4. Position the surge tank inlet hose to the retaining feature of the air cleaner assembly.



5. Route the surge tank inlet hose under the hood assist rod support.
6. Position J 38185 to the clamp in order to connect the surge tank inlet hose (2) to the surge tank (1).
7. Fill the cooling system. Refer to Cooling System Draining and Filling .

Radiator Surge Tank Inlet Hose/Pipe Replacement RHD

Tools Required

J 38185 Hose Clamp Pliers

1. Partially drain the cooling system. Refer to Cooling System Draining and Filling .



2. Position J 38185 to the clamp in order to remove the surge tank inlet hose (1) from the surge tank (3).



3. Position J 38185 to the clamp in order to remove the surge tank inlet hose from the radiator.



4. Disconnect the air intake duct hoses from the throttle body assembly.



5. Position J 38185 to the clamp in order to remove the surge tank inlet hose from the throttle body assembly.
6. Remove the surge tank inlet hose from the vehicle.

1. Position J 38185 to the clamp in order to connect the surge tank inlet hose to the throttle body assembly.



2. Connect the air intake duct hoses to the throttle body assembly.



3. Position J 38185 to the clamp in order to connect the surge tank inlet hose to the radiator.



4. Position the surge tank inlet hose to the retaining feature of the underhood fuse block cover.
5. Route the surge tank inlet hose under the hood assist rod support.



6. Position J 38185 to the clamp in order to connect the surge tank inlet hose (1) to the surge tank (3).
7. Fill the cooling system. Refer to Cooling System Draining and Filling .

Radiator Surge Tank Inlet Hose/Pipe Replacement LY7

Tools Required

J 38185 Hose Clamp Pliers

1. Partially drain the cooling system. Refer to Cooling System Draining and Filling .



2. Position J 38185 to the clamp in order to remove the surge tank inlet hose (2) from the surge tank (1).



3. Position J 38185 to the clamp in order to remove the surge tank inlet hose from the radiator.
4. Position the J 38185 to the clamp in order to remove the surge tank inlet hose from the throttle body assembly.
5. Remove the surge tank inlet hose from the vehicle.

1. Position the J 38185 to the clamp in order to connect the surge tank inlet hose to the throttle body assembly.



2. Position J 38185 to the clamp in order to connect the surge tank inlet hose to the radiator.



3. Position the surge tank inlet hose to the retaining feature of the air cleaner assembly.



4. Route the surge tank inlet hose under the hood assist rod support.
5. Position the J 38185 to the clamp in order to connect the surge tank inlet hose (2) to the surge tank (1).
6. Fill the cooling system. Refer to Cooling System Draining and Filling .

Radiator Surge Tank Inlet Hose/Pipe Replacement LS6

Tools Required

J 38185 Hose Clamp Pliers

1. Partially drain the cooling system. Refer to Cooling System Draining and Filling .



2. Position J 38185 to the clamp in order to remove the surge tank inlet hose from the surge tank.



3. Position J 38185 to the clamp in order to remove the surge tank inlet hose from the radiator.



4. Position the J 38185 to the clamp in order to remove the surge tank inlet hose from the throttle body assembly.
5. Remove the surge tank inlet hose from the vehicle.

1. Position the J 38185 to the clamp in order to connect the surge tank inlet hose to the throttle body assembly.



2. Position J 38185 to the clamp in order to connect the surge tank inlet hose to the radiator.



3. Position the surge tank inlet hose to the retaining feature of the air cleaner assembly.



4. Route the surge tank inlet hose under the hood assist rod support.
5. Position J 38185 to the clamp in order to connect the surge tank inlet hose to the surge tank.
6. Fill the cooling system. Refer to Cooling System Draining and Filling .