ALLANTE PRE-DELIVERY INSPECTION ALLOWANCE

The pre-delivery inspection allowance time for the 1987 Allante includes time to complete the following.

1. Pre-delivery inspection procedure check sheet (NVI/PDI form). 2. Electronic Systems Profile(ESP) checklist.

Since the Allante is a new model, items which are exclusive to the Allante have been printed in bold letters on the attached pre-delivery inspection procedure check sheet. In addition, a sample of the Electronic Systems Profile (ESP) checklist is also attached.

The base time allowance for completing the pre-delivery inspection procedure check sheet and Electronic Systems Profile (ESP) is 3.4 hours.

There is also an ADD time allowance of .2 hours for dealer programming when mobile cellular telephone option UV9 is ordered.

Normal claim procedures should be used for any warranty work which may be required when the pre-delivery inspection is performed.

This allowance becomes effective with the shipment of 1987 Allante models.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.