Removal Procedure
- Disconnect the negative
battery cable.
- Remove the left I/P sound insulator. Refer to
Instrument Panel Insulator Panel Replacement - Left Side
in Instrument
Panel, Gauges and Console.
- Remove the variable effort module electrical connector (4).
- Remove the variable effort module (3) from the multi-use bracket
(1) by pressing in on the retainer (2) and sliding down and out of the bracket.
Installation Procedure
- Install the variable effort
module (3) to the multi-use bracket (1) by sliding upword into place.
- Connect the variable effort module electrical connector (4).
- Install the left I/P sound insulator. Refer to
Instrument Panel Insulator Panel Replacement - Left Side
in Instrument
Panel, Gauges and Console.
- Connect the negative battery cable.