Removal Procedure
- Position the manual release
cable through the slot in the rear compartment trim from the inside of the
rear compartment.
- Remove the push-in retainers (3) from the fuel filler door
actuator (4).
- Remove the fuel filler door actuator (4).
- Disconnect the electrical connector (1) from the actuator (4).
Installation Procedure
- Connect the electrical
connector (1) to the actuator (4).
- Install the fuel filler door actuator (4).
- Install the push-in retainers (3) to the fuel filler door
actuator (4).
- Insert the manual release cable (2) through the slot in
the rear compartment trim.
- Verify proper operation of the fuel filler door.