Step
| Action
| Value(s)
| Yes
| No
|
1
| Did you perform the Fuel Filler Door Release System Check?
| --
| Go to
Step 2
| Go to
Fuel Filler Door Release System Check
|
2
|
- Disconnect the fuel door release switch.
- Connect a test lamp between fuel door release switch connector
terminal A and ground.
Does the test lamp light?
| --
| Go to
Step 4
| Go to
Step 3
|
3
|
- Test the F/DR REL fuse.
- If the fuse is OK, repair the open or short to ground in CKT 740
(ORN).
Is the repair complete?
| --
| Go to
Fuel Filler Door Release System Check
| |
4
| Connect a test lamp between fuel door release switch connector terminal A
and terminal B.
Does the test lamp light?
| --
| Go to
Step 5
| Go to
Step 6
|
5
|
- Inspect for proper terminal contact at the fuel door release switch
connector.
- If the contact is OK, replace the fuel door release switch.
Is the repair complete?
| --
| Go to
Fuel Filler Door Release System Check
| |
6
|
- Disconnect the fuel door release actuator connector.
- Connect a test lamp between actuator connector terminal B
and ground.
- Install the fuel door release switch.
- Activate the switch.
Does the test lamp light?
| --
| Go to
Step 7
| Go to
Step 8
|
7
|
- Connect a test lamp between the fuel door release actuator terminals A
and B.
- Activate the fuel door release switch.
Does the test lamp light?
| --
| Go to
Step 9
| Go to
Step 10
|
8
| Test for an open in CKT 79 (PNK).
Is the repair complete?
| --
| Go to
Fuel Filler Door Release System Check
| --
|
9
|
- Inspect for proper terminal contact at the fuel door release actuator
connector.
- If the contact is OK, replace the fuel door release actuator.
Is the repair complete?
| --
| Go to
Fuel Filler Door Release System Check
| --
|
10
|
- Inspect G302 for proper terminal contact.
- If the contact is OK, repair open in CKT 1050 (BLK).
Is the repair complete?
| --
| Go to
Fuel Filler Door Release System Check
| --
|
Step
| Action
| Value(s)
| Yes
| No
|
1
| Did
you perform the Fuel Filler Door Release System Check?
| --
| --
| Go to
Fuel Filler Door Release System Check
|
2
|
- Disconnect the release switch connector.
- Connect a test lamp between release switch connector terminal A
and ground.
Does the test lamp light?
| --
| Go to
Step 4
| Go to
Step 3
|
3
|
- Test the F/DR fuse.
- If the fuse is OK, repair the open or short to ground in in CKT 840
(ORN).
Is the repair complete?
| --
| Go to
Fuel Filler Door Release System Check
| Go to
Step 4
|
4
| Connect a test lamp between Release Switch connector terminal A
and terminal B.
Does the test lamp light?
| --
| Go to
Step 5
| Go to
Step 6
|
5
|
- Inspect for proper terminal contact at the Release Switch connector.
- If the contact is OK, replace the release switch.
Is the repair complete?
| --
| Go to
Fuel Filler Door Release System Check
| --
|
6
|
- Disconnect the Fuel Door Release Actuator connector.
- Connect a test lamp between actuator connector terminal B
and ground.
- Install the Fuel Filler Door Release Switch.
- Activate the switch.
Does the test lamp light?
| --
| Go to
Step 7
| Go to
Step 8
|
7
|
- Connect a test lamp between the Fuel Door Release Actuator terminal A
and terminal B.
- Activate the Fuel Door Release Switch.
Does the test lamp light?
| --
| Go to
Step 9
| Go to
Step 10
|
8
| Repair the open in CKT 79 (PNK).
Is the repair complete?
| --
| Go to
Fuel Filler Door Release System Check
| --
|
9
|
- Inspect for proper terminal contact at the Fuel Door Release Actuator
connector.
- If the contact is OK, replace the Fuel Door Release Actuator.
Is the repair complete?
| --
| Go
to
Fuel Filler Door Release System Check
| --
|
10
| Repair the open in
CKT 1050 (BLK).
Is the repair complete?
| --
| Go
to
Fuel Filler Door Release System Check
| --
|