Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the entire Oldsmobile Lumbar System Check performed? | -- | Go to Step 2 | |
2 |
Is the voltage within the specified range? | 10 - 15 V | Go to Step 3 | Go to Step 5 |
3 | Connect a J 39200 DMM from the lumbar seat module connector C1 cavity B (GRY) (left) or cavity C (GRY) (right) to ground. Is the voltage within the specified range? | 10 - 15 V | Go to Step 4 | Go to Step 6 |
4 | Replace the lumbar seat module. Is the repair complete? | -- | -- | |
5 | Test CKT 385 (PPL) (left) or CKT 759 (PPL) (right) for an open between the seat lock switch and the lumbar seat module. Refer to Testing for Continuity in Wiring Systems. Is CKT 385 or CKT 759 OK? | -- | Go to Step 6 | Go to Step 8 |
6 | Test CKT 388 (GRY) (left) or CKT 758 (GRY) (right) for an open between the seat lock switch and the lumbar seat module. Refer to Testing for Continuity in Wiring Systems. Is CKT 388 or CKT 758 OK? | -- | Go to Step 7 | Go to Step 8 |
7 | Replace the seat/lock switch. Refer to Power Seat Switch Replacement . Is the repair complete? | -- | -- | |
8 | Repair the suspect circuit. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- |
