For 1990-2009 cars only
Removal Procedure
- Detach the sunshade from the center support (1).
- Remove the 3 fasteners from the outboard side of the sunshade.
- Pull down on the sunshade in order to remove the sunshade from the headliner.
- Partially lower the headliner in order to disconnect the lighted vanity mirror wire connector, if equipped.
Remove the fastener from the center support (1).
Installation Procedure
- Connect the lighted vanity mirror electrical connector, if equipped.
- Install the headliner, as necessary.
- Install the sunshade through the openings in the headliner.
- Install the 3 fasteners on the outboard side of the sunshade.
- Install the fastener for the center support (1).
- Attach the sunshade to the center support (1).
- Push upward on the sunshade.
