Step
| Action
| Value(s)
| Yes
| No
|
1
| Did you perform the Power Windows System Check?
| --
| Go to
Step 2
| Go to
Power Windows System Check
|
2
|
- Disconnect the left front power window switch connector.
- Place the ignition switch in the RUN position.
- Place the window lockout switch in the LOCK position.
- Use a J 39200
digital
multimeter (DMM) in order to measure the voltage between the left front power
window switch connector terminal S and ground.
Is the voltage within the specified range?
| 10-15 V
| Go to
Step 3
| Go to
Step 4
|
3
|
- Disconnect the right rear power window switch connector.
- Turn the ignition switch to the RUN position.
- Use the DMM in order to measure the voltage between the right
rear window switch connector terminal F and ground.
Is the voltage within the specified range?
| 10-15 V
| Go to
Step 4
| Go to
Step 5
|
4
| Replace the left front power window switch. Refer to
Front Side Door Window Switch Replacement
Did you complete the repair?
| --
| Go to
Power Windows System Check
| --
|
5
| Repair a short to power in CKT 1307 (DK BLU). Refer to
Wiring Repairs
in Wiring Systems.
Did you complete the repair?
| --
| Go to
Power Windows System Check
| --
|
