Did you perform the Power Mirrors System Check?

--

Go to Step 2

Go to Outside Mirrors System Check

1. Disconnect the power mirror switch connector.
2. Connect a J 39200 digital multimeter (DMM) between the power mirror switch connector terminal A and ground.

Is the voltage within the specified range?

10-15 V

Go to Step 3

Go to Step 4

Connect the DMM between the power mirror switch connector terminal A and terminal J.

Is the voltage within the specified range?

10-15 V

Go to Step 5

Go to Step 6

Repair the open or the short to ground in CKT 40 (ORN). Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Outside Mirrors System Check

--

Replace the power mirror switch. Refer to Power Mirror Switch Replacement in Wiring Systems.

Did you complete the repair?

--

Go to Outside Mirrors System Check

--

Repair the open in CKT 150 (BLK). Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Outside Mirrors System Check

--

Did you perform the Power Mirrors System Check?

--

Go to Step 2

Go to Outside Mirrors System Check

Use a J 39200 digital multimeter (DMM) in order to backprobe between one of the following components and ground:

Is the voltage within the specified range?

10-15 V

Go to Step 3

Go to Step 12

Use the DMM in order to backprobe between one of the following components:

Is the voltage within the specified range?

10-15 V

Go to Step 4

Go to Step 13

Disconnect the memory seat/mirror module connector C2. Use the DMM in order to measure the voltage between the memory seat/mirror module connector C2 terminal A and ground.

Is the voltage within the specified range?

10-15 V

Go to Step 6

Go to Step 5

Repair the open or the short to ground in CKT 1340 (ORN). Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Outside Mirrors System Check

--

1. Disconnect the memory seat/mirror module connector C1.
2. Turn the ignition switch to the ON position.
3. Use the DMM in order to measure the voltage between the memory seat/mirror module connector C1 terminal C12 and ground.

Is the voltage within the specified range?

10-15 V

Go to Step 8

Go to Step 7

Repair the open or the short to ground in CKT 39 (PNK). Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Outside Mirrors System Check

--

Use the DMM in order to mewasure the voltage between the memory seat/mirror module connector C2 terminal B and B+.

Is the voltage within the specified range?

10-15 V

Go to Step 10

Go to Step 9

Repair the open in CKT 150 (BLK). Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Outside Mirrors System Check

--

1. Set the mirror select switch to the left outside power mirror.
2. Use the DMM in order to backprobe the following circuits:

•	The power mirror switch terminal 7 (YEL) and ground (Oldsmobile)

•	The power mirror switch terminal 5 (YEL) and ground (Buick)

3. Move the power mirror switch to the mirror up position.

Is the voltage within the specified range?

10-15 V

Go to Step 11

Go to Step 14

Replace the memory seat/mirror module. Refer to Memory Seat Control Module Replacement in Seats.

Did you complete the repair?

--

Go to Outside Mirrors System Check

--

Repair the open in CKT 40 (ORN). Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Outside Mirrors System Check

--

Repair the open in CKT 150 (BLK). Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Outside Mirrors System Check

--

Replace the power mirror switch. Refer to Power Mirror Switch Replacement .

Did you complete the repair?

--

Go to Outside Mirrors System Check

--