Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Driver Information System Check? | -- | Go to Step 2 | |
2 |
Do all DIC display segments illuminate for approximately 3 seconds? | -- | Go to Step 4 | Go to Step 3 |
3 | Inspect the DIC connector for proper terminal contact. Is the contact OK? | -- | Go to Step 5 | Go to Step 8 |
4 | Inspect CKT 40 (ORN) for a open. Is the wiring OK? | -- | Go to Step 9 | Go to Step 7 |
5 | Replace the HVAC control assembly. Did you complete the repair? | -- | -- | |
6 | Inspect the following terminals for proper terminal contact:
Are the contacts OK? | -- | Go to Step 19 | |
7 | Repair the open in CKT 40 (ORN). Did you complete the repair? | -- | -- | |
8 | Repair the poor terminal contact. Did you complete the repair? | -- | -- | |
9 | Inspect for a open in CKT 41 (BRN). Is the wiring OK? | -- | Go to Step 11 | Go to Step 10 |
10 | Repair the open in CKT 41 (BRN). Is the wiring OK? | -- | -- | |
11 | Inspect for a open in CKT 150 (BLK). Is the wiring OK? | -- | Go to Step 13 | Go to Step 12 |
12 | Repair the open in CKT 150 (BLK). Did you complete the repair? | -- | -- | |
13 | Inspect for a open in CKT 351 (BLK/WHT). Is the wiring OK? | -- | Go to Step 15 | Go to Step 14 |
14 | Repair the open in CKT 351 (BLK/WHT). Did you complete the repair? | -- | -- | |
15 | Inspect for a short to ground in CKT 40 (ORN). Is the wiring OK? | -- | Go to Step 17 | Go to Step 16 |
16 | Repair the short to ground in CKT 40 (ORN). Did you complete the repair? | -- | -- | |
17 | Inspect for a short to ground in CKT 41 (BRN). Is the wiring OK? | -- | Go to Step 6 | Go to Step 18 |
18 | Repair the short to ground in CKT 41 (BRN). Did you complete the repair? | -- | -- | |
19 | Repair the poor terminal contact. Did you complete the repair? | -- | -- |
