Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
1 | Did you perform the Instrument Cluster System Check? | -- | Go to Step 2 | |
2 |
Does the voltage approximately equal the specified value? | 12 V | Go to Step 4 | Go to Step 3 |
3 | Inspect CKT 745 (GRY/BLK) for an open. Is the wiring OK? | -- | Go to Step 5 | Go to Step 8 |
4 | Measure the voltage between the front door jamb switch connector terminals from one of the following sides:
Does the voltage approximately equal the specified value? | 12 V | Go to Step 6 | Go to Step 7 |
5 | Inspect the instrument cluster connector C1 terminal F2 for proper contact. Is the contact OK? | -- | Go to Step 6 | -- |
6 | Replace the instrument cluster. Is the repair complete? | -- | -- | |
7 | Inspect CKT 151 (BLK/WHT) for an open. Is the wiring OK? | -- | Go to Step 8 | -- |
8 | Repair the wiring. Is the repair complete? | -- | -- | |
9 | Inspect the front door jamb switch connector for proper contact. Is the contact OK? | -- | -- |