Step | Action | Value(s) | Yes | No | ||||||
---|---|---|---|---|---|---|---|---|---|---|
1 | Did you perform the Interior Lamps System Check? | -- | Go to Step 2 | |||||||
2 |
Does the MALL module sound 2 tones when the car is unlocked using the keyless entry transmitter? | -- | Go to Step 3 | Go to Step 8 | ||||||
3 | Turn the interior lamp switch on. Does the MALL module sound 1 tone when the interior lamp switch is activated? | -- | Go to Step 4 | Go to Step 11 | ||||||
4 |
Does the MALL module sound 1 tone when the left front door is opened and 1 tone when the left front door is closed? | -- | Go to Step 5 | Go to Step 14 | ||||||
5 |
Does the MALL module sound 1 tone when the right front door is opened and 1 tone when the right front door is closed? | -- | Go to Step 6 | Go to Step 17 | ||||||
6 |
Does the MALL module sound 1 tone when the left rear door is opened and 1 tone when the left rear door is closed? | -- | Go to Step 7 | Go to Step 20 | ||||||
7 | Test CKT 156 (WHT) for a short to ground between S356 and the MALL module. Refer to Testing for Short to Ground in Wiring Systems. Is CKT 156 OK? | -- | Go to Step 27 | Go to Step 26 | ||||||
8 | Disconnect the remote function actuator (RFA) module connector. Do all of the courtesy lamps turn off? | -- | Go to Step 9 | Go to Step 10 | ||||||
9 | Replace the RFA module. Refer to Remote Control Door Lock Receiver Replacement in Keyless Entry. Is the repair complete? | -- | -- | |||||||
10 | Test CKT 394 (LT GRN/BLK) for a short to ground. Refer to Testing for Short to Ground in Wiring Systems. Is CKT 394 OK? | -- | Go to Step 25 | Go to Step 26 | ||||||
11 | Disconnect the interior lamp switch connector. Do all of the courtesy lamps turn off? | -- | Go to Step 12 | Go to Step 13 | ||||||
12 | Replace the interior lamp switch. Refer to Instrument Cluster Trim Panel Replacement in Instrument Panel, Gauges and Console. Is the repair complete? | -- | -- | |||||||
13 | Test CKT 1393 (DK BLU) for a short to ground. Refer to Testing for Short to Ground in Wiring Systems. Is CKT 1393 OK? | -- | Go to Step 25 | Go to Step 26 | ||||||
14 | Disconnect the left front door jamb switch. Do all of the courtesy lamps turn off? | -- | Go to Step 15 | Go to Step 16 | ||||||
15 | Replace the left front door jamb switch. Refer to Door Lock Actuator Replacement in Doors. Is the repair complete? | -- | -- | |||||||
16 | Test CKT 155 (BLK) for a short to ground. Refer to Testing for Short to Ground in Wiring Systems. Is CKT 155 OK? | -- | Go to Step 25 | Go to Step 26 | ||||||
17 | Disconnect the right front door jamb switch. Do all of the courtesy lamps turn off? | -- | Go to Step 18 | Go to Step 19 | ||||||
18 | Replace the right front door jamb switch. Refer to Door Lock Actuator Replacement in Doors. Is the repair complete? | -- | -- | |||||||
19 | Test CKT 49 (DK BLU) (Oldsmobile) or CKT 528 (YEL) (Buick) for a short to ground. Refer to Testing for Short to Ground in Wiring Systems. Is CKT 49 (Oldsmobile) or CKT 528 (Buick) OK? | -- | Go to Step 25 | Go to Step 26 | ||||||
20 | Disconnect the left rear door jamb switch. Do all of the courtesy lamps turn off? | -- | Go to Step 24 | Go to Step 21 | ||||||
21 | Disconnect the right rear door jamb switch. Do all of the courtesy lamps turn off? | -- | Go to Step 22 | Go to Step 23 | ||||||
22 | Replace the right rear door jamb switch. Refer to Rear Side Door Lock Actuator Replacement in Doors. Is the repair compete? | -- | -- | |||||||
23 | Test CKT 49 (DK BLU) for a short to ground. Refer to Testing for Short to Ground in Wiring Systems. Is CKT 49 OK? | -- | Go to Step 25 | Go to Step 26 | ||||||
24 | Replace the left rear door jamb switch. Refer to Rear Side Door Lock Actuator Replacement in Doors. Is the repair complete? | -- | -- | |||||||
25 | Replace the MALL. Refer to Body Control Module Replacement in Body Control System. Is the repair complete? | -- | -- | |||||||
26 | Repair the suspect wiring. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |||||||
27 | Test CKT 1732 (ORN) for a short to battery voltage between S336 and the MALL module. Refer to Testing for Continuity in Wiring Systems. Is CKT 1732 OK? | -- | Go to Step 25 | Go to Step 26 |