GM Service Manual Online
For 1990-2009 cars only

Headlamps Inoperative - High Beams Buick

Step

Action

Value(s)

Yes

No

1

Did you perform the Headlight System Check?

--

Go to Step 2

Go to Headlight System Check

2

  1. Disconnect the headlamp dimmer switch connector C202.
  2. Place the headlamp switch in the ON position.
  3. Connect a fused jumper between the headlamp dimmer switch connector C202 cavity E13 (PPL) and ground.

Do the headlights switch from low beams to high beams?

--

Go to Step 5

Go to Step 3

3

  1. Disconnect the lamp control module (LCM) connector C2.
  2. Connect a fused jumper from the LCM connector C2 cavity G (ORN) to cavity B (LT GRN).

Do the high beams light?

--

Go to Step 7

Go to Step 4

4

Repair the open in CKT 11 (LT GRN) between the LCM and S142. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Headlight System Check

--

5

Test for an open in CKT 351 (BLK/WHT) between S263 and the headlamp dimmer switch connector C202. Refer to Testing for Continuity in Wiring Systems.

Is CKT 351 OK?

--

Go to Step 6

Go to Step 9

6

Replace the headlamp dimmer switch.

Is the repair complete?

--

Go to Headlight System Check

--

7

Test for an open in CKT 524 (PPL) between the LCM and the headlamp dimmer switch connector C202. Refer to Testing for Continuity in Wiring Systems.

Is CKT 524 OK?

--

Go to Step 8

Go to Step 9

8

Replace the LCM.

Is the repair complete?

--

Go to Headlight System Check

--

9

Repair the suspect wiring. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Headlight System Check

--

Headlamps Inoperative - High Beams Oldsmobile

Step

Action

Value(s)

Yes

No

1

Did you perform the Headlight System Check?

--

Go to Step 2

Go to Headlight System Check

2

Use a J 39200 digital multimeter (DMM) in order to backprobe the headlamp dimmer switch connector C202 between cavity E10 (RED) and ground.

Is the voltage within the specified range?

10-15 V

Go to Step 3

Go to Step 5

3

  1. Disconnect the headlamp dimmer switch connectors C202.
  2. Connect a fused jumper between the headlamp dimmer switch connector C202 cavity E10 (RED) and cavity E11 (LT GRN).

Do the high beam headlights illuminate?

--

Go to Step 4

Go to Step 6

4

Replace the headlamp dimmer switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle in Steering Wheel and Column - Tilt.

Is the repair complete?

--

Go to Headlight System Check

--

5

Repair the open in CKT 42 (RED) between S221 and the headlamp dimmer switch connector C202. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Headlight System Check

--

6

Repair the open in CKT 11 (LT GRN) between the headlamp dimmer switch connector C202 and S142. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Headlight System Check

--