For 1990-2009 cars only
Removal Procedure
- From the inside of the rear compartment, remove the 2 push-in retainers (2) from the high mounted stop lamp access cover (1).
- Push upward and rotate the center brace away from the insulation.
- Remove the screws (3) that retain the high mounted stop lamp to the rear shelf (1).
- Remove the lamp assembly (2) by pushing the lamp rearward in order to disengage the tabs.
- Turn the sockets in a counterclockwise direction in order to remove the sockets from the lamp assembly.
- Remove the bulbs from the sockets.
Installation Procedure
- Install the bulbs to the sockets.
- Turn the sockets in a clockwise direction in order to retain the sockets to the lamp assembly (2).
- Install the lamp assembly (2) by pushing the lamp forward and engaging the tabs.
- Install the screws (3).
- Install the center brace.
- Install the high mounted stop lamp access cover (1) and the 2 retainers (2).
