GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 289234  Size: SH
  1. Detach the sunshade from the center support (1).
  2. Remove the fastener from the center support (1).

  3. Remove the 3 fasteners from the outboard side of the sunshade.
  4. Pull down on the sunshade in order to remove the sunshade from the headliner.
  5. Partially lower the headliner in order to disconnect the lighted vanity mirror wire connector, if equipped.

Installation Procedure


    Object Number: 289234  Size: SH
  1. Connect the lighted vanity mirror electrical connector, if equipped.
  2. Install the headliner, as necessary.
  3. Install the sunshade through the openings in the headliner.
  4. Install the 3 fasteners on the outboard side of the sunshade.
  5. Install the fastener for the center support (1).
  6. Attach the sunshade to the center support (1).
  7. Push upward on the sunshade.