For 1990-2009 cars only
- Remove the upper cover and the lower cover. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle .
- Use the tilt lever in order to tilt the column to the UP position.
- Remove the spring guide (1) from the tilt spring (2).
Caution
The tilt spring and the spring guide are under pressure and could become
a projectile. During the disassembly and assembly procedures, secure the tilt
spring. Exercise caution when removing or installing the tilt spring and
the spring guide, as bodily injury may result.
| 3.1. | Pry the tilt spring up until a bulge occurs and most of the tilt spring tension is removed. |
| 3.2. | Secure the tilt spring and continue prying until the tilt spring disengages from the post on the steering column support assembly (2) and the steering column tilt head assembly (3). |
| 3.3. | Remove the tilt spring (1). |
