GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 1998 🢒 Riviera 🢒 Steering 🢒 Steering Wheel and Column - Tilt 🢒 Windshield Wiper and Washer Switch Assembly - Assemble - Off Vehicle

    Object Number: 362089 Size: SH
  1. Install the pivot and pulse switch assembly to the bearing and adapter housing assembly.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the 2 tapping screws (2).

    3. Tighten
    Tightens the screws to 0.5 N·m (5 lb in).


    Object Number: 362088 Size: SH
  3. Reconnect the pivot and pulse connector to the bulkhead connector.
  4. Install the upper cover and the lower cover. Refer to Steering Column Trim Covers - Assemble - Off Vehicle .